*Disclaimer - Please verify which mount type you have (1 or 2) by going under the vehicle to check. VAG has been using either mount with no rhyme or reason to year, model, or trim. Thank you.*

Our Stage 2 Torque Arm Insert is aimed at maximizing performance while still maintaining most daily-driving comforts. However, these Stage 2 torque arm inserts are made of 90a durometer polyurethane, so do expect some reduction in comfort due to increase noise and vibrations. These Stage 2 inserts are best suited for the enthusiast looking for maximum performance and vehicles that are track-prepped. Under hard acceleration, the pendulum mount (commonly referred to as the 'dogbone' or by VW as the 'torque arm') acts to limit rotational movement of the engine. The factory bushings do a satisfactory job, while limiting vibrations, but only during sedate driving conditions. When pushed hard, those bushings flex creating a vague feeling in the engine and gearbox and adding to the dreaded wheel hop phenomenon. Our pendulum mount torque arm insert fills the voids in the stock rubber bushing, making what was a soft rubber bushing with voids into what behaves like a solid mount. With the insert installed, you will notice that throttle response will feel better and your shifts will feel more crisp and defined, especially on manual transmission cars. INCLUDES:

• Torque arm / dogbone polyurethane insert
• Laser cut washer
• Steel spacer
• High strength grade 10.9 replacement bolt

• All Version 2 MQB Platform Vehicles Including MK7 GOLF/GTI & 8V Audi A3/S3

• Stage 2 inserts are only recommended for heavily modified vehicles or for customers who value performance over comfort. There will be noticeable in-cabin vibrations and harshness with the Stage 2 insert regardless of engine type or modifications. Not recommended for TDI vehicles under any circumstances!