Description
Slipping while engaging, difficulty getting into gear, and an engagement height close to the floor all tell you that the clutch disc is beginning to wear too thin to be driveable. No matter how easy you are on your clutch, replacement is inevitable. Euromotiv has your solution with this remanufactured clutch disc. No more grinding or difficulty engaging gears.
It is recommended that you replace the pressure plate and throw-out bearing with the clutch disc, as they tend to wear together.
When replacing your clutch, always be sure to inspect your flywheel for excessive wear and 'hot spots.' It's best to resurface your flywheel through an approved machine shop. If any damage is suspected or discovered, replace the flywheel with a quality unit from Euromotiv to be sure you won't have to do this job again.
** NOTE: Fasteners used in most clutch systems are one time, stretch bolts. These bolts should not be reused in any circumstance, as they can back out, even after properly torquing them. Check the Euromotiv website for all of the fasteners you need to finish the job.
- 06D141031B
- 06D141031