Description
When building a vehicle for the track, it is important that everything is given proper attention to ensure the best handling possible. One thing that often goes unchanged, especially in a lot of quickly built drift vehicles, is steering angle. When drifting, steering angles plays a big role in the handling and responsiveness of your vehicle. If the stock steering angle and the control arms themselves aren't quite set up correctly or are too weak, it could lead to poor lap times or even to you losing control of the vehicle and wrecking.
An easy way to address this issue is IRP's BMW Lock Kit. This kit includes significantly stronger control arms and will dramatically increase the steering angle and level of front suspension adjustment possible. Built specifically for drifting needs, these parts will easily take the use and abuse that stock control arms never could and will help you dial in your steering specifically to your needs.
Features:
- CNC Laser Cut Components
- Plug & Play - includes all needed hardware
- Increase to 65 Degree (or more) steering angle
- Includes Camber Plates
- Stiffer offset control arm bushings
- Roll Center and Bump Steer Correction Plates
- High strength control arms with steel monoball ball joints
- Increased length steering tie rods with steel monoball ball joints
- DriftAllstar- & EEDC-Tested
- Total weight of all components included: 13.5 kg / 29.8 lbs
- *Widens track by 100 mm at each side. Total width of track increases by 200 mm