The IE Cold Air Intake system for the 3.0T engine utilizes a built-in velocity stack and ram-air design to dramatically improve airflow and stabilize induction temperatures. You'll immediately feel an improvement in horsepower and torque throughout the entire RPM range while enjoying a unique and addicting supercharger whine that sounds as good as it performs. Upgrade your Audi with the most feature-packed intake available!
Description
IE S4 & S5 INTAKE SYSTEM
INSTANT POWER
ADD +15-25HP/TQ
ON TUNED ENGINES
FLOW OPTIMIZED
VELOCITY STACK
MOTORSPORT DESIGN
OPTIONAL
CARBON FIBER
LID UPGRADE
TUNE COMPATIBILITY
| ECU STAGE | COMPATIBLE |
| STOCK | |
| STAGE 1 | |
| STAGE 2 SINGLE PULLEY | |
| STAGE 2 DOUBLE PULLEY | |
POWER TESTING
IE engineers use an extensive array of testing equipment to maximize and verify the performance of the intake design, including digital analysis, flow bench verification, and power testing on our in-house chassis dyno. The result is an authentic motorsport design that instantly adds horsepower, torque, and snappy throttle response. Typical peak gains from our CAI are roughly 15-25+ Horsepower & Torque on a tuned car.
DYNO RESULTS
Dyno chart data was collected on our in-house Dynapack hub dyno on a full bolt-on stage 2 B8 S4 3.0T engine. Testing was performed back-to-back in exacting conditions; the only change made to the vehicle between runs is the swap from a stock intake to the IE Cold Air Intake Kit.
Dyno numbers are for reference against stock numbers only. Personal dyno results will vary depending on fuel quality, local conditions, dyno brand, and correction factors.
' I feel the power
-Jhaval
' can't say enough good things about it
-Ignition Tube
' Best intake design in the market
-Kyle
HIGH-FLOW VELOCITY STACK
Incorporating our true-motorsport velocity stack into the intake design channels the force-fed charge air from the large air filter into the engine cleanly and reduces drag. This creates a very high-inertia environment that speeds up airflow as quickly as possible and without any power-robbing turbulence found in traditional aftermarket intake designs. The velocity stack also acts as a stable and solid foundation for the massive 5' filter and aluminum intake pipe for a reliable and sturdy assembly without any rubbing or rattles.
PRECISION DESIGN
Cutting-edge 3D scanning technology created a digital duplicate of the engine bay, grille, bumper, and hood. This high-resolution environment allows IE engineers to prototype the intake design and ensure an extremely high-end precision fitment. Right out of the box, you will enjoy a perfect and hassle-free installation.
SMOOTH-FLOW COUPLERS
To further cut down on turbulence, the multi-ply silicone adapters incorporate internal stops that perfectly mate each section of your intake together to create a smooth and continuous intake tract.
ALUMINUM INTAKE PIPE
A sturdy aluminum intake pipe ensures no collapsing under high-boost situations commonly found on full silicone designs.
BLACK POWDER COAT
The heat shield, velocity stack, intake pipe, and brackets are all finished in a durable black powder coat for a sleek and sporty appearance as an upgrade to any engine bay.
SIMPLE INSTALL
This Intake fits Audi B8 & B8.5 S4 & S5 3.0T V6 Supercharged engines without modification or installation hassles. The install process is simple and can be done in 30 minutes or less with basic tools. The airbox utilizes factory-style mounts that ensure a perfect fit and allows for natural engine movement which keeps intake components from getting damaged.
' manufactured with great quality parts
-Bailie S.
' very well engineered
-Don
' I was extremely impressed
-Alexander
CARBON FIBER LID (SOLD SEPARATELY)
Upgrade your intake and bring a classy and stylized look to your engine bay with the optional carbon fiber lid upgrade. The carbon shape is specially designed to not only fit your IE intake, but to also conform to the factory engine bay for a 100% perfect fit and finish. A hidden series of install holes under the trim seal on your intake allows for an easy install of our popular carbon fiber lid.
' Perfect fitment, and looks fantastic!
-Scott N.
UNIQUE SOUND
Your factory intake exists to silence and eliminates all engine sound. Installing an IE intake system releases the Audi S class sportiness, including the supercharger whine and engine throttle. The unique velocity stack design produces a classy yet powerful engine note. This level of sound is not heard through other brand intakes and is much more refined.
Check out some customer videos in the slider to hear it for yourself!
' extremely satisfied with the sound
-Stew
' Love it!!!!!!!!!
-Kyle
' Honestly, just overall perfect
-Aram
COMPETITIVE ADVANTAGE
IE engineers set out to produce the highest-quality, best-sounding, and leading performance cold air intake available for your Audi. To accomplish this goal, we made sure to design this intake with a market-leading features list. Check out how our design compares against our top competitors.
| FEATURE | COMPETITOR A | COMPETITOR B | COMPETITOR C | COMPETITOR D | COMPETITOR E | IE 3.0T INTAKE |
| OPTIONAL CF LID | X | X | | X | X | |
| VELOCITY STACK | | X | X | X | X | |
| 5' AIR FILTER | | X | X | X | X | |
| HARD INTAKE PIPE | | X | | | | |
| MOUNTED FILTER | X | | X | | X | |
| BUILT-IN SAI | X | | X | X | X | |
| MATERIAL | Metal | Carbon fiber | None/etal bracket | Carbon fiber | Metal | Aluminum |
IE THROTTLE BODY
For those looking for every ounce of power, this intake kit is direct install with the IE 3.0T Throttle Body Kit. Your throttle body kit will include a larger inlet silicone adapter that creates a perfect high-flow transition from the intake velocity stack directly to the new 80mm throttle body. No modifications or extra adapters are required! *IE Throttle Body Kit sold separately.
FITMENT GUIDE
| MAKE | MODEL | YEAR | GENERATION |
| AUDI | S4 | 2009-2015 | B8 & B8.5 |
| AUDI | S5 Coupe 3.0T | 2013-2015 | B8.5 |
| AUDI | S5 Coupe | 2009-2015 | B8 & B8.5 |
Does not fit early model S5 B8 models with 4.2L V8 engines
Free Ground Shipping!
This intake ships for free within the continental USA *Some restrictions apply
AUDI B8/B8.5 S4 & S5
INTAKE SYSTEM
The IE Cold Air Intake system for the 3.0T engine utilizes a built-in velocity stack and ram-air design to dramatically improve airflow and stabilize induction temperatures. You'll immediately feel an improvement in horsepower and torque throughout the entire RPM range while enjoying a unique and addicting supercharger whine that sounds as good as it performs. Upgrade your Audi with the most feature-packed intake available!
TUNE COMPATIBILITY
| ECU STAGE | COMPATIBLE |
| STOCK | |
| STAGE 1 | |
| STAGE 2 SINGLE PULLEY | |
| STAGE 2 DOUBLE PULLEY | |
POWER TESTING
IE engineers use an extensive array of testing equipment to maximize and verify the performance of the intake design, including digital analysis, flow bench verification, and power testing on our in-house chassis dyno. The result is an authentic motorsport design that instantly adds horsepower, torque, and snappy throttle response. Typical peak gains from our CAI are roughly 15-25+ Horsepower & Torque on a tuned car.
DYNO RESULTS
Dyno chart data was collected on our in-house Dynapack hub dyno on a full bolt-on stage 2 B8 S4 3.0T engine. Testing was performed back-to-back in exacting conditions; the only change made to the vehicle between runs is the swap from a stock intake to the IE Cold Air Intake Kit.
Dyno numbers are for reference against stock numbers only. Personal dyno results will vary depending on fuel quality, local conditions, dyno brand, and correction factors.
' I feel the power
-Jhaval
' can't say enough good things about it
-Ignition Tube
' Best intake design in the market
-Kyle
CARBON FIBER LID
(SOLD SEPARATELY)
Upgrade your intake and bring a classy and stylized look to your engine bay with the optional carbon fiber lid upgrade. The carbon shape is specially designed to not only fit your IE intake, but to also conform to the factory engine bay for a 100% perfect fit and finish. A hidden series of install holes under the trim seal on your intake allows for an easy install of our popular carbon fiber lid.
' Perfect fitment, and looks fantastic!
-Scott N.
VELOCITY STACK
Incorporating our true-motorsport velocity stack into the intake design channels the force-fed charge air from the large air filter into the engine cleanly and reduces drag. This creates a very high-inertia environment that speeds up airflow as quickly as possible and without any power-robbing turbulence found in traditional aftermarket intake designs.
PRECISION DESIGN
Cutting-edge 3D scanning technology created a digital duplicate of the engine bay, grille, bumper, and hood. This high-resolution environment allows IE engineers to prototype the intake design and ensure an extremely high-end precision fitment. Right out of the box, you will enjoy a perfect and hassle-free installation.
UNIQUE SOUND
Your factory intake exists to silence and eliminates all engine sound. Installing an IE intake system releases the Audi S class sportiness, including the supercharger whine and engine throttle. The unique velocity stack design produces a classy yet powerful engine note. This level of sound is not heard through other brand intakes and is much more refined.
Check out some customer videos in the slider to hear it for yourself!
' extremely satisfied with the sound
-Stew
' Love it!!!!!!!!!
-Kyle
' Honestly, just overall perfect
-Aram
HIGH-FLOW COUPLERS
To further cut down on turbulence, the multi-ply silicone adapters incorporate internal stops that perfectly mate each section of your intake together to create a smooth and continuous intake tract.
ALUMINUM INLET
A sturdy aluminum intake pipe ensures no collapsing under high-boost situations commonly found on full silicone designs.
BLACK POWDER COAT
The heat shield, velocity stack, intake pipe, and brackets are all finished in a durable black powder coat for a sleek and sporty appearance as an upgrade to any engine bay.
SIMPLE INSTALL
This Intake fits Audi B8 & B8.5 S4 & S5 3.0T V6 Supercharged engines without modification or installation hassles. The install process is simple and can be done in 30 minutes or less with basic tools. The airbox utilizes factory-style mounts that ensure a perfect fit and allows for natural engine movement which keeps intake components from getting damaged.
' manufactured with great quality parts
-Bailie S.
' very well engineered
-Don
' I was extremely impressed
-Alexander
COMPETITIVE ADVANTAGE
IE engineers set out to produce the highest-quality, best-sounding, and leading performance cold air intake available for your Audi. To accomplish this goal, we made sure to design this intake with a market-leading features list. Check out how our design compares against our top competitors.
| FEATURE | A | B | C | D | IE |
| OPTIONAL LID | X | X | | X | |
| VELOCITY STACK | | X | X | X | |
| 5' AIR FILTER | | X | X | X | |
| HARD INTAKE PIPE | | X | | | |
| MOUNTED FILTER | X | | X | | |
| BUILT IN SAI | X | | X | X | |
IE THROTTLE BODY
For those looking for every ounce of power, this intake kit is direct install with the IE 3.0T Throttle Body Kit. Your throttle body kit will include a larger inlet silicone adapter that creates a perfect high-flow transition from the intake velocity stack directly to the new 80mm throttle body. No modifications or extra adapters are required! *IE Throttle Body Kit sold separately.
FITMENT GUIDE
| MAKE | MODEL | YEAR | GENERATION |
| AUDI | S4 | 2009-2015 | B8 & B8.5 |
| AUDI | S5 Coupe | 2013-2015 | B8.5 |
| AUDI | S5 Coupe | 2009-2015 | B8 & B8.5 |
Does not fit early model S5 B8 models with 4.2L V8 engines