Description
Are you getting warning lights on your dash when you shouldn’t be? This is an all too common occurrence and typically results from a bad Tire Pressure Sensor. This sensor will give you a warning light if the pressure in the tires is too low. If it’s worn out, you will get a light even if the pressures are correct.
Worried about resetting your TPMS? No worries, we've got you covered.
Vehicles with iDrive:
- Turn on ignition, without starting the engine
- Press down iDrive controller to select Info Sources/ Settings menu
- Select Settings, then rotate to Vehicle/Tires and press down to select.
- Navigate to the TPM screen
- Start the engine
- Select Reset, then select Yes.
- Begin driving. TPMS will complete initialization when the vehicle is in motion.
Vehicles without iDrive/MINI:
- Start the engine
- On the turn signal stock flip the control switch up or down until you see INIT.
- When INIT appears, press the BC button on the end of your stock.
- Press and hold the BC button for approximately 5 seconds until INIT is displayed with a check box.
- Note: If no check box appears, there is an issue not allowing your TPMS to be initialized. Please try again, if still unable to initialize diagnose the system for errors.
- Begin driving. TPMS will complete initialization when the vehicle is in motion.