Tire Pressure Sensor - Set Of 4

Are you getting warning lights on your dash when you shouldn’t be? This is an all too common occurrence and typically results from a bad Tire Pressure Sensor. This sensor will give you a warning light if the pressure in the tires is too low. If it’s worn out, you will get a light even if the pressures are correct.

Worried about resetting your TPMS? No worries, we've got you covered.

Vehicles with iDrive:

• Turn on ignition, without starting the engine
• Press down iDrive controller to select Info Sources/ Settings menu
• Select Settings, then rotate to Vehicle/Tires and press down to select.
• Navigate to the TPM screen
• Start the engine
• Select Reset, then select Yes.
• Begin driving. TPMS will complete initialization when the vehicle is in motion.

Vehicles without iDrive/MINI:

• Start the engine
• On the turn signal stock flip the control switch up or down until you see INIT.
• When INIT​ appears, press the BC button on the end of your stock.
• Press and hold the BC button for approximately 5 seconds until INIT​ is displayed with a check box.
• Note: If no check box appears, there is an issue not allowing your TPMS to be initialized. Please try again, if still unable to initialize diagnose the system for errors.
• Begin driving. TPMS will complete initialization when the vehicle is in motion.

**Product may be contained in VDO or Continental packaging**