Description
Are you getting warning lights on your dash when you shouldn’t be? This is an all too common occurrence and typically results from a bad Tire Pressure Sensor. This sensor will give you a warning light if the pressure in the tires is too low. If it’s worn out, you will get a light even if the pressures are correct.
Worried about resetting your TPMS? No worries, we've got you covered.
These come in orange or black and are the same thing they just changed the color of the housing for batches.
Vehicles with iDrive:
- Turn on ignition, without starting the engine
- Press down iDrive controller to select Info Sources/ Settings menu
- Select Settings, then rotate to Vehicle/Tires and press down to select.
- Navigate to the TPM screen
- Start the engine
- Select Reset, then select Yes.
- Begin driving. TPMS will complete initialization when the vehicle is in motion.
Vehicles without iDrive/MINI:
- Start the engine
- On the turn signal stock flip the control switch up or down until you see INIT.
- When INIT appears, press the BC button on the end of your stock.
- Press and hold the BC button for approximately 5 seconds until INIT is displayed with a check box.
- Note: If no check box appears, there is an issue not allowing your TPMS to be initialized. Please try again, if still unable to initialize diagnose the system for errors.
- Begin driving. TPMS will complete initialization when the vehicle is in motion.
- TPMS