Description
Eurowise V2 front upper control arm with heavy duty sealed ball joint, with grease fittings on the inner and outer joint/bushing for a squeak free serviceable product. Built using Moog HD Ball Joint designed for Baja Trucks. Ball joints can be replaced simply with shop press tool or portable ball joint remover. These ball joints are found on Domestic trucks exceeding Porsche OEM ball joints strength and durability. These Moog joints are seen on Pre-runner Chevy Trucks and more! The inner bushings are polyurethane bushings with a built in grease fitting for quick and easy service greasing to keep down the noise and wear.
Lift your Cayenne or Touareg 3 inches or more but cant get the camber dialed back in? Eurowise has developed these control arms specifically for their 3" lift kits and more! Cayenne Audi Q7 and VW Touareg's running more than 2.5 inches of lift and require proper alignment. If you have a subframe drop and don't have upper control arms with camber adjustment there's a good chance your rig has too much positive camber. The factory lower camber adjustments do not have enough movement to put your this chassis back into proper specs to drive safely and reliably. These are built from DOM Tubing with spherical ball joint on the spindle and Polyurethane mounting bushings at the rearward control arm mounting points. This will allow for maximum travel when off-roading which translates to better performance and ride.
These are direct fit with no modifications needed. They also have built in level sensor brackets for your headlights.
NOTE: Due to the nature of polyurethane bushings, it is recommended to grease them every oil change to keep them lubricated and noise free. Grease fittings are built into the arms using universal grease fittings that are common found on OEM serviceable joints. CV axle grease and any ball joint grease is acceptable for lubricating the bushings.