Polar FIS is a plug and play device that delivers detailed vehicle parameters to the MFA/FIS screen on your dashboard of your VW/Audi. It plugs into the Body Control Module to offer detailed diagnostics from the CAN-BUS. No need for countless gauges on your dash, A-pillar, vents or center console anymore. Polar FIS delivers real time information so you can access the data when you want it. Over 164 parameters are accessible with the ability to spread specific parameters over 5 screens.

Real time data is crucial when things start to go bad in your vehicle not to mention the buffers the factory builds into the algorithms like the difference in speed displayed on the speedometer versus actual speed. Polar FIS pulls the true data prior to entering the algorithm and give you the real-time information.

The device works with normal clusters (FIS display) and with the newest Virtual Cockpit display.

Parameters (For full list of possible parameters please see: https://www.autopolar.net/wiki/index.php/PolarFIS#Parameter_list )

• Real Speed (Read from ECU)
• Oil Temperature (°C / °F)
• Coolant Temperature (°C / °F)
• Outside Temperature (°C / °F)
• Intake Temperature (°C / °F)
• Turbo Poost Pressure (bar/ PSI)
• Exhaust Gas Temperature (EGT)
• RPM motor
• Battery Voltage
• Fuel Remaining (Liters / Gallons)
• Atmospheric Pressure
• Fuel Pump Pressure
• Motor Load
• Ambient Temperature (Engine ECU)
• Coolant Temperature Engine Output
• Coolant Temperature Leaving the Radiator
• Oil Level
• Brake Master Cylinder Pressure
• Fuel Rail Pressure

Important: Comfort functions are not available for MQB models at this time.

Quick Start Guide After Install:

1. Scroll to phone screen on your steering wheel

2. Hold OK on phone screen

3. Press OK on Visualization

4. Press OK on Parameters

5. Press OK on Screen 1

6. Press OK on Parameters and start choosing the one you want for screen 1 up to 4 parameters per screen and continues to screen 2 and so forth.